Baldor DC Controls offered by Dalton Bearing Service Inc

Home BaldorBaldor DC Controls

Baldor DC Controls

One Way
One-way DC controls are designed to operate permanent magnet or wound field motors. If the motors rotation needs to be changed, the armature leads need to be reversed. Some NEMA 1 and NEMA 4X controls offer optional switched for reversal. Stopping of a motor with a one-way control should be done by dynamic braking, some controls offer the Forward-Brake-Reverse switch for this purpose too.

		Regenerative Regen controls are designed to easily operate the motor in forward and reverse directions without motor lead reversal. A separate set of SCRs is used for each direction. With a regen control, stopping is controlled by using the motor`s regenerated voltage sent back to the AC line.

Electric Motor Controls

Baldor

Dalton Bearing Service is proud to offer a full line of Angular Contact Ball Bearings. Whether you have questions on pricing or technical information for any Angular Contact Ball Bearings , Dalton Bearing Service is ready to assist you. Please use the "Request for Quote" section of our website for a prompt response to any questions regarding Angular Contact Ball Bearings.