|
|
|
|
|
Baldor Motion Control Products
|
|
Motion Control Solutions
Baldor offers a wide range of motion control products to suit many different applications. Motion controllers are available in either PCI format, for integration into a PC, or as standalone units with USB and Serial interfaces. Offering between 1 and 12 axes of control, Baldor motion controllers are available with digital and analog I/O for complete machine control. The CAN bus interface can be used to expand the I/O configuration.
Motion control systems can be up and running quickly thanks to Baldor’s Mint programming language. Mint is a versatile, yet easy to use, Basic like programming language. A wide range of programmable moves are supported including trapezoidal, S-ramp, linear and circular interpolation, helical interpolation, electronic CAM, gearbox and flying shear. User defined profiles can be added using the supplied embedded ‘C’ libraries. Mint also supports full control of the I/O and communications back to a host controller. Machine level networking and optional operator panel control can all be controlled under a single Mint application program.
Our latest generation NextMove controllers and intelligent drive, MintDrive, all support multi-tasking Mint, with the ability to write complex programs easily. The number of tasks is limited only by available memory.
A complete set of ActiveX components are supplied with the controllers, allow full motion and I/O sequencing to be performed on a host PC. Application programs can be written in popular programming languages such as Visual Basic™, Delphi and LabView.
The motion controllers are complemented by a complete range of servo drives.
|
|
|
|
|
|
NextMove BXII
NextMove BXII provides between 2 and 4 axes of servo control. A master encoder input provides the ability to synchronize axes to an external source. NextMove BXII comes in a panel mount configuration with 2 serial ports and 2 CAN ports in addition to digital and analog I/O. Further I/O can be added using the CAN bus ports. NextMove BXII is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.
|
|
|
|
|
NextMove ES
NextMove ES is a cost effective rack mounted motion controller for the control of up to 6 axes (2 servo and 4 stepper). Available with a USB interface, this provides a high speed interface to the PC. The onboard CAN port can be used to interface to I/O and HMI devices, as well as peer-to-peer networking capabilities with other Mint controllers. NextMove ES is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.
|
|
|
|
|
NextMove PCI
NextMovePCI provides high speed interpolation up to 8 axis (4 servo & 4 stepper), with capability up to 12 axis with the addition of expansion cards. Onboard Dual Port RAM (DPR) provides a high speed interface to the PC. NextMove PCI is user configurable for servo, vector or stepper drives. An optional unit is available for interfacing motor commands, feedback, additional I/O, and expansion boards. NextMove PCI is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.
|
|
|
|
|
NextMove e100
The NextMove e100 builds on the proven NextMove controller family of products and now integrates management of real-time Ethernet networks using the industry standard protocol ETHERNET Powerlink. Drives, I/O devices, sensors, absolute encoders can be added to the Powerlink network and controlled from the Mint programming language. This greatly simplifies system design and installation, and simultaneously expands the capabilities of the NextMove e100 as a machine control platform.
|
|
|
|
|
NextMove ESB
With it’s high speed DSP (Digital Signal Processor) core, NextMove ESB provides a cost effect solution for up to 3 axes of servo and 4 axes of stepper control. The onboard I/O can be expanded through the CANbus port. NextMove ESB is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components. It’s USB port provides a fast connection back to the PC. The RS232 port or optional RS485 can be used to interface to other equipment.
|
|
|
|
|
NextMove PCI-2
NextMove PCI-2 is the latest generation PCI based motion controller from Baldor. Based around the popular NextMove PCI controller, NextMove PCI-2 offers a pin compatible motion controller with over twice the performance. NextMove PCI-2 is a compact (7") PCI based controller for the control of up to 12 axes of motion. A single card can control up to 4 axes of servo and 4 axes of stepper. Expansion cards are available to take this to 12 axes of servo and 12 axes of stepper.
|
|
|
|
|
NextMove ST
With its integrated stepper drives (2A @ 37V), NextMove ST provides a cost effective solution for up to 3 axes of control. A further 4th stepper can be drive externally. Onboard I/O, serial and USB interfaces and CANbus make NextMove ST an ideal low cost machine controller. The CANbus interface can be used to interface to other Mint based controllers. NextMove ST is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.
|
|
|
|
|
|
Dalton Bearing Service is proud to offer a full line of Baldor Motion Control Products. Whether you have questions on pricing or technical information for any Baldor Motion Control Products , Dalton Bearing Service is ready to assist you. Please use the "Request for Quote" section of our website for a prompt response to any questions regarding Baldor Motion Control Products.
|
|
|
|
|
|
|
Baldor Motion Control Products |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
| NTN-Bower |
|
Dalton Bearing Service is proud to announce our new offering of N.........
|
| Announcement |
|
Dalton Bearing is proud to announce the introduction of the THK’s line.........
|
|
| more |
 |
|
|
