BanFlex Combo

Ideally suited for short centers and small diameter pulleys, BanFlex Combos "bended" construction minimizes or eliminates the "turnover" problem normally association with small cross belts.  The ribbed construction provides superior flexibility while maintaining lateral stability.

BanFlex

The small cross section of the BanFlex belts makes them the preferred choices where short centers and small diameter pulleys are required on compact equipment designs.

BanFlex belt precision molded, seamless construction provides vibration free operation at speeds in excess of 10,000 rpm.

Duraflex GL

Light industrial applications, appliances and power equipment require the same tough, long wearing, trouble free belts as high horsepower drives.  Because Duraflex GL has the same construction features as Power King heavy duty belts, you get maximum belt life on short center distance, high speed fractional horsepower drives.

Metric V Belts

In addition to belts manufactured to RMA (Rubber Manufacturers Association) standards, Bando produces belts to European standard DIN 7753 and ISO4184.  These standards are based on the metric system of units and have different cross section designations.  The Narrow "Wedge" profile allows for higher speed ratios, shorter center distances and overall more compact drives.  They are direct replacements for belts on imported machinery and on domestic equipment for export.

Power Ace

Because they are still the most practical, economical and dependable belts for most industrial drives, innvovations have failed to displace the need for classical section belts.  Bandos constant improvements in materials, design and manufacturing methods help Power King keep pace with industrys ever increasing demands for long, trouble-free belt service.

Rib Ace

Bandos Rib Ace, an ultra thin, ultra flexible belt with ribs in the bottom that mate with sheave grooves of a smiliar shape, offers distinct advantages which include:

• The use of smaller, less costly sheaves
• Smoother, vibration free performance
• High speed capability
• Space-saving, compact design
• Higher efficiency than conventiional V-belts
• Speed ratios up to 40 to 1
• The use of small backside idlers
• Serpentine drive design capability
• Shorter center distance drives
• Molded belt with ground rib performance

Because Rib Ace is a single belt, there is no wasted space between sheave grooves, no matching problems, and no belt turnover.  This V-ribbed belt also improves performance on 1/8 turn, 1/4 turn and mule drives.

Ultrapower AG KC*

Ultrapower AG "KC" is constructed specifically for those drives where a clutching function is essential to successful operation. Compounded to provide maximum durability during the "clutching" phase of operation, the "KCs" envelope, aramid fiber tension members and low profile design provide extended service life and superior flexibility to handle idler and reverse bend drive configurations typical of many power equipment applications.

Power King Power Ace Combo

When shock loads, pulsation or misalignment cause belts to whip, flip over or jump off the sheaves,  you need the powerful combination of benefits you get with Power King Combo and Power Ace Combo.  Bando starts by building individual premium quality belts and join them with a tough tie band that, when cured, welds the belt together permanently.  This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straight line-so the belts cant flip over or jump off, even under severe shock loads.
Combos are ideal on verical shaft drives.  And, they are a low cost, low maintenance alternative to gear and chain on many applications.

Power Ace Cog Combo

Designed specifically for difficult applications, Bandos Powe Ace Cog Combo belts combine the superior performance of a cog belt with the stability of banded construction.  Ideally suited for difficult applications where small sheave diameters, heavy shock loads, or evironmental debris can cause single belts to whip, turn over or jump out of the pulley grooves.

Constructed with the same precision molded cog design as Bandos Power Ace Cog, the Cog Combos unique symmetrical profile distributes bending stresses uniformly and provides maximum heat dissipation for increased belt life.

Sheave diameters as smal  as 2.5" are acceptable due to the high flexibilty ratio.

Power King Cog and Power Ace Cog

These high horsepower energy savers feature a molded cog design.

When the proven reliability, economy and efficiency of conventional V-belts are combined with an innovative molded cog design, belt users reap important benenfits!

Power King

Because they are still the most practical, economical and dependable belts for most industrial drives, innvovations have failed to displace the need for classical section belts.  Bandos constant improvements in materials, design and manufacturing methods help Power King keep pace with industrys ever increasing demands for long, trouble-free belt service.

Power Max

Variable speed drives demand a unique combination of belt features.  Because these belts are wide in proportion to their thickness, they must have extreme crosswise rigidity.  Without it, the belt will dish in, throw the tensile cords out of alignment, and affect speed control.  Variable speed belts also require lengthwise flexibility to bend around small sheaves without excess strain that will shorten belt life.

Bandos cog design solves these potential problems by providing excellent flexibility, without sacrificing the crosswise rigidity required to properly position the tensile cords.  The result is precise speed control, a wide range of speed ratios, and long, dependable service.