Fafnir Radial Ball Bearings

Size Range
3mm - 600mm bore

Fafnir radial ball bearings use a versatile design that permits relatively high-speed operation under a range of load conditions. Bearings consist of an inner and outer ring with a cage containing a complement of precision balls.

The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction. The maximum-capacity type supports primarily radial loading.

An extremely wide variety of sizes is available in extra-light to heavy series. Various shield and seal configurations help protect internal bearing components and retain lubricants.

Typical Applications

• General industrial 
• Automotive
• Agricultural
• Chemical
• Utilities

Expanded Options

• Special coatings for corrosion resistance
• Special seal designs
  

NTN Radial Ball Bearings 
 
Made from hardened, alloy steel in both conrad type and maximum capacity designs.  The series features a close balance between dimensions of bore and OD, and load capacity. This, and their availability with any combination of shields, seals (contact and non-contact), and snap rings make them a popular choice in a broad range of applications.

Several tolerance grades and cage designs are available to best suit the running precision and speed requirements of your applications.

Mainly designed to carry radial loads but able to withstand moderate thrust loads and combinations thereof. Also available is a self-aligning, NTN double row ball design for applications where shaft alignment is a problem.

Ask about the TMB bearing that provides longer bearing life, particularly when operating in contaminated oil lubrication such as in gear boxes.

Series: 6000, 6200, 6300, 6900, 60, 67, 68, R, RA, BL200, BL300, 1200, 1300, 2200, 2300

Size Range: 10 mm to 320 mm OD.

SNR Radial Ball Bearings
 
The SNR single-row radial contact ball bearing range is suitable for the most diversified applications. Designed essentially to sustain moderate radial loads, these bearings, which are the most commonly used, also sustain moderate axial loads in all directions. They are particularly suitable for applications with high rotating speeds and when energy loss limitation is sought.

Technical data:

• Standard steel sheet, or solid cages, or polyamide cages (with 25% glass fibre fill)
• Nitrile Seal or baffle
• Normal or increased clearance (C3). Other clearance categories are available on request.