|
Browning Gears
|
|
Experience The Power of BROWNING Gearing...
Over 10,000 BROWNING Stock Gears Help You To "Get In Gear" For Greater Productivity
• Spur • Miter • Bevel • Change • Helical • Worm • Rack... The Most Comprehensive Lines of Off-The-Shelf Gears In the Industry.
These gears are available in 20° pressure angle from 20 to 4 dp, and 14 1/2° pressure angle from 48 to 3 dp... all designed to increase output, reduce costs and avoid specials.
Thousands Of Shaft-Ready Finished Bore And Bushing Types (a Browning exclusive) eliminate rework costs, assures true-running precision at all times
More Stock Sizes Made Of Steel... you get weldability plus greater strength, at cast iron prices
Extra Tooth Depth And Larger Radii provide stronger teeth, a deeper lubrication reservoir and more clearance
Many Helical And Bevel Gears Are Available Hardened for longer life. Most worms are hardened and ground
Many Odd-Tooth Sizes
Custom Gear Capabilities -- up to 60" diameter and 17" face |
|
|
|
|
|
Minimum Bore Spur Gears
Features & Benefits
- Available in Steel and Cast Iron
- These are available in 20º PA from 20 to 4 DP, and 14½° PA from 32 to 3 DP
- Designed to increase output, reduce costs and avoid specials
- Minimum Bore Spur Gears are provided from stock to allow for simple modifications
- Custom gear capabilities - up to 60" diameter and 17" face
- Meets AGMA quality standards
|
|
|
|
|
Finished Bore Spur Gears
Features & Benefits
- Browning Finished Bore Spur Gears are manufactured from steel
- These are available in 20º PA with 16 DP, and 14½° PA from 16 to 8 DP
- All designed to increase output, reduce costs and avoid specials
- Custom gear capabilities - up to 60" diameter and 17" face
- Meets AGMA quality standards
|
|
|
|
|
Bushed Spur Gears
Features & Benefits
- Browning Bushed Gears hold the shaft with clamp fit and eliminate costly reworking on replacement gears
- The only stock Bushed Open Gear line available
- Less expensive and more readily available than reworks
- Custom gear capabilities - up to 60" diameter and 17" face
- Meets AGMA quality standards
|
|
|
|
|
Non-Metallic Spur Gears
Features & Benefits
- Made of laminated Phenolic material having high impact strength
- Excellent qualities of resistance of moisture and wear
- Usually employed as driving pinions with steel or cast iron mating gears, where the reduction of noise is a primary importance
|
|
|
|
|
Change Gears
Features & Benefits
- Browning Change Gears are Manufactured from Steel
- Are stocked with finished bore and two keyways
- Used with stock Change Gear Bushings
- Used for easy ratio changes
- Can weld on a Steel-Hub to create a Spur Gear
- Can Drill and Tap for Bolt On applications
- Can weld on Steel Hub for use with Browning Split Taper Bushing
- Meets AGMA quality standards
|
|
|
|
|
Gear Rack
Features & Benefits
- Available in 2 ft., 4 ft., 6 ft., 12 ft. lengths
- The only 12 ft. lengths available from stock in the industry
- Cut oversized to allow for matched ends
- Available from stock in 14 1/2º and 20º PA
- In addition to our large stock offering of standard Gear Rack, we have expanded our capabilities to include:
* From 1 DP to 64 DP
* Metric Module Pitch
* Face Widths to 18" (450 mm)
* Thickness to 18" (450 mm)
* Maximum width 23" (554 mm)
* Up to AGMA Class 11 Spacing Accuracy
|
|
|
|
|
Stem Pinions
Features & Benefits
- Stem pinions are designed with smaller number of teeth to provide increased ratio options when used with standard 14 1/2º Spur Gears
- Used for easy bearing support or where space is limited
- Meets AGMA quality standards
|
|
|
|
|
Helical Gears
Features & Benefits
- Used for transmission of power of motion between non-intersecting shafts
- Long tooth lead provides quieter and smoother gear mesh
- Many Helical gears are hardened for longer life
- They are made in right and left hand 45º Helix Angle with 14 1/2º P.A.
- Helical Gears of the same hand operate at 90º for motion transfer
- Helical Gears of opposite hand operate on parallel shafts
- Recommended for high speed, high torque applications where pitch velocities exceed 1,000 FPM, up to 2400 RPM
- Helical Gears operating on parallel shafts provide a stronger, smoother and quieter running drive than spur gears of the same pitch and size
- Meets AGMA quality standards
|
|
|
|
|
Bevel and Miter Gears
Features & Benefits
- Used for transmission of power of motion between 90º intersecting shafts
- Spiral Bevel and Miter gears are hardened for longer life
- Spiral Bevel Gears have continuous pitch line contact and therefore run more smoothly and quietly than straight tooth gears
- Large ratios available from stock for flexible design
- Meets AGMA quality standards
|
|
|
|
|
Worm Gears and Worms
Features & Benefits
- Browning offers both Cast Iron and Bronze Worm Gears from 32 to 3 DP
- Bronze Gears give double the Torque of Cast Iron Gears
- Hardened, Ground and Polished Worms give double the torque of an Unhardened Worm
- Available in Single, Double and Quadruple Thread
- Multiple threads give higher torque
- Ratios 4:1 to 100:1
- Higher ratios obtained in limited space
- Transmit torque on 90º, non-intersecting shafts
|
|
|
