INA Yoke Type Track Rollers
Yoke type track rollers are single or double row units fitted on studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full complement sets of cylindrical or needle rollers. Yoke type track rollers can support high radial loads and axial loads arising from misalignments and skewed running and are suitable for cam drives, slideways, conveying equipment etc. The bearings are available with or without an inner ring as well as in open and sealed versions.
- Available in designs to meet ISO, popular metric and
inch series cross sections.
- Metric product with crowned OD standard and avail-
able with cylindrical OD.
- Inch product with cylindrical OD standard and avail-
able with crowned OD.
- Designed with outer races to act as tires indepen-
dent of rigid housings, effective load ratings include
reverse bending stress allowances.
- Available with needle roller complement, cylindrical
roller complements and ball complements to match
machine needs.
- Available with sliding or rolling thrust contact or with-
out axial guidance.
- Sealed versions include gap, labyrinth and contact
types.
- Available with reduced runout.
- Relubrication groove in inner ring bore.
INA Stud Type Cam Followers
Stud type track rollers comprise thick-walled outer rings with a profiled outside surface, solid roller studs with a locating thread, thrust washers and needel roller and cage assemblies or single or double row full complement sets of cylindrical or needle rollers. They can support high radial loads and axial loads arising from misalignments and skewed running and are suitable for cam drives, slideways, conveying equipment etc. The bearings are available in several designs and with or without an eccentric.
- Available in designs to meet ISO, popular metric and
inch series cross sections.
- Metric product with crowned OD standard and avail-
able with cylindrical OD.
- Inch product with cylindrical OD standard and avail-
able with crowned OD.
- Designed with outer races to act as tires indepen-
dent of rigid housings, effective load ratings include
reverse bending stress allowances.
- Available with needle roller or cylindrical roller com-
plements.
- Available with sliding or rolling thrust contact or with-
out axial guidance.
- Sealed versions include gap, labyrinth and contact
types.
- Available with reduced runout.
- Available with eccentric sleeves for adjusting the
center of action.
|
