AC Flange Mounted

1/12 to 3/4 HP Designs
60Hz 208-230/460 & 575 VAC
1:4 Reduction Stages
TEFC Enclosure
"FO" Motor Conduit Box
Face and Flanged Mounting
CSA & CE Compliant

DC Flange Mounted

• 1/12 to 3/4 HP Designs
• 90 Volt PM Motor
• 1:4 Reduction Stages
• TEFC Enclosure (Meets IP44)
• "FO" Motor Conduit Box
• Face & Flanged Mounting
• CSA & CE Compliant

DC Foot Mounted

• 1/12 to 3/4 HP Designs
• 90 Volt PM Motor
• 1:4 Reduction Stages
• TEFC Enclosure
• "FO" Motor Conduit Box
• Integral Foot Mounting
• CSA & CE Compliant

Series 2000/3000 Gearmotors and Speed Reducers 

• Broad Range of Gearing and Input Styles -Gearmotor, Input Shaft, C-Face, Scoop.
• Innovative Self Locking Tapered Shaft Connection allows on-site replacement with out removing oil, primary pinion, or disconnecting the load.
• Broadest Line of Motor Ends -TEFC (single phase and 3 phase), explosion proof, corro-duty, inverter duty, brakemotor. Stocked at over 300 distributors and priced at c-face levels. 

 
MbN Helical Shaft Mount

• Tapered bushing design.
• 1/3 through 30HP gearmotors.
• Output torque through 26,000 In. Lbs.
• Ratios from 3.15:1 to 6300:1
  

CbN Series In Line Helical

• Output torque through 145,000 In. Lbs.
• 1/3HP through 75HP gearmotors.
• Ratios from 0.8:1 to 6300:1.
• Footed and flange mounting.

OtN Series Right Angle Helical Bevel

• Output torque through 88,000 In. Lbs.
• 1/3HP through 50HP gearmotors.
• Ratios from 12.5:1 to 7100:1.
• Footed, face or flange mounting.
• Solid or hollow output shaft available.

HWN Right Angle Helical Worm

• Output torque through 19,000 In. Lbs.
• 1/3HP to 10HP gearmotors.
• Tapered bushed, finished bore and keyed output shafts.
• Ratios from 8.0:1 to 12500:1.
• Dimensional interchange to leading competitors.

Series 7000 Industry Interchange Helical Inline Gearmotors and Speed Reducers

Freedom of Choice...

Now you are free to choose Gearmotors and Reducers Based on Easy Fit and Selection!

• Full line of Enclosed Helical Inline Gearmotors and Speed Reducers
• Critical Mounting Dimensions match many popular brands for
  Simple Selection
• Easy Installation
• Industrial Grade Cast Iron Housings
• Modular Construction
• Millions of combinations can be assembled-to-order quickly
• Fewer spares required than competitive units
• Wide variety of inputs (gearmotor, c-face, input shaft, scoop mount, top mount)
• Broadest selection of Motor Ends available
• TEFC, Corro-duty, Explosionproof, True Inverter Duty (NEMA MG1, Part 31 compliant), Brake motors
• Industry`s Highest Overall Torque Rating
   
   
  

IRA SYNCROGEAR WORM & WORM HELICAL GEARMOTORS & SPEED REDUCERS

• Utilize same motor end as Series 2000 Gearmotors
• Foot and flange mount worm and worm helical available.
• Torque range up to 3500 in.-lbs.
• Innovative self-locking taper shaft connection (motor to gear) allows on-site replacement without removing primary pinion, or disconnecting the load.  This ensures precision alignment and eliminates fretting to expedite motor removal.

SHAFTMOUNT SPEED REDUCERS

• Shaft Mounted Speed Reducer
• High Efficiency
• Output Torque up to 55,000 in. lbs.
• Available nominal ratios of 5:1, 15:1 and 25:1
• 7 AGMA sizes: 107 - 315
• Multi-position torque arm assembly
• Excellent reversibility
  

SCREW CONVEYOR DRIVES

• All Drives Meet CEMA Standards
• Oversized tapered roller bearings for high thrust load capacity
• Thrust Load Capacity up to 11,240 lbs.
• 7 AGMA sizes: 107 through 315
• Output Torque up to 55,000 in. lbs.
• Available nominal ratios of 5:1, 15:1 and 25:1
• A wide range of CEMA Drive Shafts are available