Grease Pumps

Alemite Grease Pumps are designed to handle a wide range of applications, fluid viscosities and system pressures. Combined with other Alemite products such as hose reels, dispensing valves and automatic lubrication devices, Alemite Grease Pumps can deliver lubricants from pails, drums, tanks and totes.

Oil Pumps

Alemite Oil Pumps are ideal for applications where fluids are piped to multiple hose outlets, reels, metered outlets or portable service stations. Combined with other Alemite products such as hose reels, dispensing valves and automatic lubrication devices, Alemite Oil Pumps can deliver motor oils, gear oils, cutting oils, hydraulic oils, machine coolants, automatic transmission fluids and a wide range of petroleum based fluids from pails, drums, tanks and totes. Use for both bulk transfer and pumping directly from the original container.
 

Hydraulic Pumps

Alemite's 8600 series hydraulic powered pump offers a wide range of grease output in a compact design. This pump features a compact footprint and, since it is hydraulically powered, there is no need for a bulky compressor. This makes the 8600 series an ideal choice for automatic lubrication systems installed on mobile equipment where space is limited.

FEATURES:

• Hydraulic powered with sturdy construction
• Compact footprint; does not require a bluky compressor
• Pressure automatically drops when motor stops to prevent over lubrication
• Operates relably even at low temperatures/no icing
• Does not require a separate vent valve in small- to medium-sized systems

Chemical and Material Handling Pumps

Alemite Chemical and Material Handling Pumps are designed to provide the capabilities and versatility needed to construct systems meeting all the individual requirements of various applications. Chemicals and materials are pumped from their original containers or bulk storage tanks, transferred to the point of application and then sprayed, dispensed or extruded.

Undercoating Pumps

Materials may be sprayed using air-atomizing or airless spray systems. Applications include the spraying of adhesives, roof coatings and hundreds of similar applications.

SPECIFICATIONS:

• Air inlet: 1/4" NPTF(f)
• Material outlet: 3/8" NPTF(f)
• H-Pump air motor diameter: 2-7/16"

Diaphragm Pumps

Alemite Low-Pressure Diaphragm Pumps are designed for both high-volume transfer and dispensing a variety of low-viscosity fluids. Medium-pressure pumps make used oil evacuation and transfer safe and simple. These high-volume pumps transfer used oil to storage tanks quickly, and are designed to handle the abrasive materials that can be contained in used oil. All diaphragm pumps are equipped with an air connector and quick detach air coupler.

FEATURES:

• 3/8" models have an inlet and outlet that swivels, allowing installation in any position
   

Electric Transfer Pumps

Alemite Electric Transfer Pumps offer a complete solution to transferring chemicals and other fluids from drums, tanks and totes. Packages are available with an electric motor, downtube, dispensing nozzle, 6 ft. of chemically resistant hose, barrel adapter, pump storage bracket and hose clamps. These pump packages offer the ideal solution for a wide variety of applications. Products may also be purchased individually.

FEATURES:

• Designed to transfer a wide range of liquids from barrels and tanks
• Eliminates direct contact with aggressive chemicals
• Eliminates chemical splashing and spills
• Empty a 55-gal. (200-ltr) drum in 90 seconds
• Seal-less design - no seals to wear out or replace
• Lightweight and portable
• All pump tubes & motors are interchangeable
• Pump tube components are replaceable
• Max. viscosity is 1,500 cps / 1,500 mPAS
• Pumps, motors and downtubes interchange with many competitors
• Pumps can "run dry" and against a closed valve without damage
• No mechanical seals
• 35 gpm