T-101 This open style series is designed to offer the best possible use of the limited bearing space that may be available. T-101 consists of two hardened steel races with a full complement of balls. When preloaded and installed so as to be held by the outside diameter B, the "V" grooved raceways enable this series to carry radial loads equal to 25% of its thrust load capacity, while decreasing the amount of friction created by a full contact round groove design. The open style design of this bearing will allow the maximum circulation of lubricating products.

Auburn Open Style T-101 Ball Thrust Bearing is designed to make the best possible use of the limited amount of bearing space that may be available.

When preloaded and installed so as to be held by the outside diameter "B" this bearing will carry a radial load equal to 25% of its thrust load capacity.

• Ball Thrust Bearing
• Open Style
• Maximum Capacity, Minimum Space
• Auburn "V" Grooves

T-100 This enclosed style series offers protection from dust, dirt, water and foreign matter. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The "V" grooved raceways on this bearing enable it to carry radial loads equal to 25% of its thrust load capacity, while decreasing the amount of friction created by a full contact round groove design. The banded style of the T-100 series typically allows more balls per bearing, thus providing greater thrust capacity than a 3 piece retained style bearing of similar dimensions.

Auburn Enclosed Style T-100 Ball Thrust Bearing is recommended for use in exposed locations where a protection from dust, dirt, water, or other foreign matter is required. It is self-contained, the two races and balls being held together as a single unit by the outside sleeve.

• Ball Thrust Bearing
• Enclosed Style
• Self Contained
• Auburn "V" Grooves

SC-100 This totally enclosed style series is recommended for use in exposed locations where protection from foreign matter is required. The one piece design answers the need for an easily installed bearing requiring a minimum of machine work for its use. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The "V" grooved raceways decrease the amount of friction created by full contact round groove designs.

Auburn Enclosed Style SC-100 Ball Thrust Bearing answers the need for an easily installed bearing requiring a minimum of machine work for its use. It is a self contained totally enclosed unit and is recommended for use in exposed locations where protection from foreign matter is required.

• Ball Thrust Bearing
• Enclosed Style
• Self Contained
• Auburn "V" Grooves

T-114 This open style series requires protection from dust, dirt, water and foreign matter, therefore a machined housing or oil bath is recommended. The balls are retained between two hardened steel races, banded together by a mild steel or brass sleeve on the inside diameter. When preloaded and installed so as to be held by the outside diameter B the "V" grooved raceways enable this series to carry radial loads equal to 25% of its thrust load capacity while decreasing the amount of friction created by a full contact round groove design. The banded style typically allows more balls per bearing , thus providing greater thrust capacity than a 3 piece retained style bearing of similar dimensions.

Auburn Enclosed Style T-114 Ball Thrust Bearing is recommended for use in enclosed protected locations, inside the machine housing or where it is desired to operate it in an oil bath. It is self contained, the two races and balls being held together as a unit by the inside sleeve.

When preloaded and installed so as to be held by the outside diameter "B" this bearing will carry a radial load equal to 25% of its thrust load capacity.

• Ball Thrust Bearing
• Open Style
• Self Contained
• Auburn "V" Grooves
  

SC-114-RG This totally enclosed style series is recommended for use in exposed locations where protection from foreign matter is required. The one piece design answers the need for an easily installed bearing requiring a minimum of machine work for its use. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The round grooved raceways combine with thick race sections to provide unusual capacity and life for its overall size.

Auburn Enclosed Style SC-114-RG Ball Thrust Bearing answers the need for an easily installed bearing requiring a minimum of machine work for its use. The small pitch diameter of the ball grooves for a given shaft diameter, and the large diameter balls used give a relatively low peripheral ball speed. This together with the heavy race sections and deep grooves result in a bearing of unusual capacity and life for its size. It is a self-contained totally enclosed unit and is recommended for use in exposed locations where protection from foreign matter is required.

• Ball Thrust Bearing
• Totally Enclosed
• Self Contained
• Round Grooves

T-200-RG This enclosed style round groove series is recommended for use where maximum carrying capacity is desired but thickness space available is limited. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The double grooved raceways provide increased capacity without increasing the overall thickness of the bearing.

Auburn Enclosed Style T-200-RG Ball Thrust Bearing is recommended for use where maximum carrying capacity is desired but thickness space is limited. It is self-contained; the two races and balls being held together as a unit by the outside sleeve.

• Ball Thrust Bearing
• Enclosed Style
• Self Contained
• Round Grooves

T-114-RG This open style round groove series is recommended for use in locations that require a relatively small bearing to provide unusual capacity and life for its size. The balls are retained between two thick hardened steel races with deep round grooves and held together by a center rivet. The one piece design of the T-114-RG series offers easy installation. The open style allows maximum circulation of lubricating products.

Auburn Open Style T-114-RG Ball Thrust Bearing answers the need for an easily installed bearing requiring a minimum amount of machine work for its use. The small pitch diameter of the ball grooves for a given shaft diameter, and the large diameter balls used give a relatively low peripheral ball speed. This together with the heavy washer sections and deep grooves result in a bearing of unusual capacity and life for its size. It is self-contained, the two races and balls being held together as a unit by the center pin.

• Ball Thrust Bearing
• Open Style
• Self Contained
• Round Grooves