SJ100 Series

• Auto Tuning matches your motor to the SJ100 for ultimate performance
• Sensorless Vector Control for precise torque and speed regulation
• Up to 200% starting torque
• Speed regulation to 0.1% accuracy
• Micro size (e.g. 1/2hp/230V is only 4.75” x 3.3” x 4.2”)
• Dynamic Braking circuit to 150%
• Intelligent terminals allow user to customize functionality
• Ratings: ¼ to 10hp, 230V single and three phase; ½ to 10hp, 460V three phase

SJ200 Series

• New Intelligent Sensorless Vector Control – NO Autotuning Required!
• Up to 200% Starting Torque
• Most compact Hitachi inverter ever
• Advanced Logic and Calculate functions
• Removable terminal strips for easy wiring
• Dynamic Braking transistor built in
• Advanced trip avoidance functions
• Removable Keypad
• NEMA4X Remote Keypad option
• MODBUS RTU RS-485 built in
• Ratings ¼ to 10hp, 230V, single and 3 phase, ½ to 10hp, 460V, 3 phase
  (Note: 7.5 hp and 10 hp models available 3Q’04)

SJ300 Series

• Advanced Sensorless Vector Control
• High starting at low speeds (200% at 5Hz, 150% at 0Hz)
• Full Vector Control with optional Feedback Board
• Online/offline auto-tuning
• Master/slave functionality
• Built in communications
• Ratings: ½ to 75hp, 230V, 3 phase, 1 to 200hp, 460V, 3 phase

HiPASS Series

The HiPASS Series includes the L300P Series Variable Frequency Drive with bypass panel furnished as a complete pre-engineered package to meet the most demanding applications. Components are pre-wired, with control and communication connections pre-wired to a terminal strip for trouble-free installation and start-up and ease of future troubleshooting.

• 208 V, 230 V, and 460/480 V models
• Ratings from 2 hp to 100 hp
• Two contactor design (VFD/Bypass)
• Compact NEMA 1 side-by-side design
• 5% line reactor on VFD input circuit
• Through the door fused disconnect
• Separate VFD service disconnect switch
• Built-in 120v control transformer
• Power ON pilot light
• By-pass ON pilot light
• 3 position selector switch, VFD-OFF-BYPASS
• Top or bottom access for wiring

L300 Series

• Automatic energy saving function for your fan and pump applications
• Easy operation with a multilingual operator panel
• Compact design
• Network compatibility
• Carrier frequency selectable to 12kHz for quiet operation
• Ratings: 15 to 75hp, 230V, 3 phase, 15 to 175hp, 460V, 3 phase

L200 Series

• Most compact Hitachi inverter ever
• Operation by terminal or keypad switch-selectable
• Improved PID Control
• Advanced Logic and Calculate functions
• Advanced trip avoidance functions
• NEMA4X Remote Keypad option
• MODBUS RTU RS-485 built in
• Ratings ¼ to 10hp, 230V, single and 3 phase, ½ to 10hp, 460V, 3 phase

Operator Interface and Networking Devices

The Hitachi Serial Communications Operator Interfaces, SC-OPE 3H and SC-OPE 3I, are easy-to-use inverter operator panels. Their four-line dot matrix displays show inverter status, and work in conjunction with their keypads to provide inverter control and parameter editing capability. The SC-OPE can be directly mounted on the inverter (in the case of the SJ300 and L300P only), panel-mounted (with the optional bezel kit), or DIN-rail mounted inside a panel (also with the optional bezel kit)
 

In addition to functioning as an enhanced operator interface, the SC-OPE has a built-in serial network interface for connecting an inverter to a variety of popular factory networks including:

• Direct-Net
• Allen Bradley DF1
• Modbus ASCII
• Modbus RTU
• Metasys N2
• BACnet
• Apogee P1

There are two versions of the SC-OPE 3 Operator. The SC-OPE 3I keypad incorporates both FORWARD and REVERSE Run buttons, while the SC-OPE 3H keypad has only a single (forward) Run button. The SC-OPE 3H also includes a HAND/AUTO selector switch.

The SC-OPE3 Configuration Editor Software allows you to easily set up a SC-OPE3 for different network communication protocols and different inverter families. You can reconfigure the Quick Menu, various communication parameters, and the startup and help splash screens. You can also save SC-OPE3 configurations to your PC hard disk for backup, or to download to multiple SC-OPE3 units. This software does NOT save inverter parameters.