|
|
Finished Bore Sprockets: Stocked for No. 35 through No. 80 chain, with standard keyway and setscrew. Many sizes stocked with and without induction hardened teeth.
|
|
|
|
Stainless Steel Finished Bore Sprockets: Not available from stock anywhere else! Linn Gear carries a wide variety for No. 25, 35, 40, 50, and 60 chain with 2 setscrews.
|
|
|
|
Ready Sprockets: An economical assortment of sprockets and hubs drilled and tapped for simple, convenient assembly with standard and hex head cap screws. Stocked for No. 35 through No. 100 chain, with finished bore hubs to accomodate shaft sizes through 2-3/4 diameter, plus a variety of square, hex, spline, and tapered key bores.
|
|
|
|
Double Strand - Mandrel Bore: Double strand steel sprockets stocked in No. 35 through No. 200 for re-boring. Most driver sizes standard with hardened teeth.
|
|
|
|
Triple Strand - Mandrel Bore: Triple stand steel sprockets stocked in No. 35 through No. 200 for re-boring. Most driver sizes standard with hardened teeth.
|
|
|
|
Double-Single Sprockets: Double strand sprockets for use with 2 single chains for roll case and conveyor drives. Stocked in Taper-Lock® bushed for No. 40 through No. 100 and with mandrel bore for re boring in No. 40 through No. 160.
|
|
|
|
EXTENDED PITCH TAPER-LOCK ® - SMALL ROLL: Machine cut, Taper-Lock ® bushed steel sprockets for small roll series extended pitch chains – No. 2040 through No. 2080.
|
|
|
|
EXTENDED PITCH TYPE A SMALL ROLL: Machine cut, Type A steel plate sprockets for small roll series extended pitch chains – No. 2040 through No. 2120.
|
|
|
|
EXTENDED PITCH TYPE B SMALL ROLL: Machine cut Type B steel sprockets for small roll series extended pitch chains – No. 2040 through No. 2120.
|
|
|
|
EXTENDED PITCH TYPW A LARGE ROLL: Machine cut, Type A steel plate sprockets for large roll series extended pitch chains – No. 2042 through No. 2122.
|
|
|
|
EXTENDED PITCH TYPE B LARGE ROLL: Machine cut, Type B steel sprockets for large roll series extended pitch chains – No. 2042 through No. 2122.
|
|
|
|
Idler Sprockets: Ball Bearing Idler Sprockets have sealed ball bearing with extended inner race and setscrews for securing to shaft. For No. 35 through No. 160 Chain.
|
|
|
|
Drivesaver Overload Clutch: Simple, economical, and adjustable over-load protection for shaft sizes from 1/4" through 3-1/2".
|
|
|
|
Chain Couplings and Covers: Finished bore, Stock bore, and Taper Lock® bushed chain couplings through 5" bore in a wide variety of sizes from - No. 40 through No. 120 chain. All components required for a complete coupling are stocked, including chains and covers.
|
|
|
|
Hinge Top Conveyor Chain Sprockets: Steel sprockets with or without shroud plates in a wide range of tooth sizes. Several sizes stocked with and without center groove.
|
|
|
|
Single Strand Steel Sprockets: No 35 through No 200; many sizes stocked both with and without induction hardened teeth.
Double Strand Steel Sprockets: No. 35 through No. 80. Driver sizes standard with hardened teeth.
Extended Pitch Sprockets: Single strand, steel sprockets for Small Roll series extended pitch chains - No. 2040 through No. 2080. Driver sizes standard with hardened teeth.
Chain Coupling Sprockets: Taper-Lock® bushed through 4" bushing bore - No. 40 through No. 120 chain.
Pipe Adapters: 4", 6", and 8" diameter adapters for welding into standard pipes available from stock with Taper-Lock® bushed bores.
Taper-Lock® Bushings: Standard inch-bore bushings through 8065, metric bore bushings through 3020, and steel bushings through 4040. Some sizes stocked in stainless steel, other sizes available made-to-order.
Weld-In Hubs for Taper-Lock® Bushings: Many mechanical power transmission components can be adapted to various shaft sizes by welding in these adapter hubs. Stock sizes allow bushing bores through 8".
|
|
|
|
Q.D.® Sprockets: Single strand steel sprockets - No 40 through No 160. Many sizes offered with and without hardened teeth.
|
|
|
|
Q.D.® Bushings: Standard cast iron bushings from JA through S in shaft sizes to 10".
|
|
|
|
Weld-In Adapters for Q.D.® Bushings: For adapting sprockets or other mechanical power transmission components to us Q.D.® Bushings. Available for bushing bores up to 10".
|
|
|
|
LSB Sprockets for HTD® Belts: Fully machined steel sprokets with steel flanges; 8 MM pitch available in 20, 30, and 50 MM width; 14 MM Pitch stocked in 40 MM width only. Other sizes or materials made to order.
|
|
|
|
Stainless Steel
Linn Gear Co has long been recognized as the industry leader in manufacturing stainless steel sprockets, gears, and other mechanical power transmission products.
Using high quality raw materials, proven technology, and having the fastest response times, Linn Gear has built a reputation of making the best quality, longest lasting products.
|
|
|
|
MILL AND ENGINEERING CHAIN SPROCKETS: Flame cut steel sprockets for nine different sizes of chains are stocked. Other sizes or odd shapes are available utilizing our CAD, CAM and CNC systems.
|
|
|
|
TYPE B SPROCKETS: Machine cut, single strand, Type B steel sprockets. The complete range from No. 25 through No. 240 are stocked including many sizes with and without induction hardened teeth.
RELATED PRODUCTS...
- STEEL FINISHED BORE TYPE B SPROCKETS
- STAINLESS STEEL TYPE B & FINISHED BORE SPROCKETS
- READY SPROCKETS & HUBS
- MULTIPLE STRAND ROLLER CHAIN SPROCKETS
- EXTENDED PITCH TYPE A SPROCKETS
|
|
|
|
TYPE C SPROCKETS: Machine cut, single strand, Type C steel sprockets. The complete range from No. 25 through No. 240 available, including many sizes with and without induction hardened teeth.
|
|
|
|
Quadruple Strand - Mandrel Bore: Four strand steel sprockets for re-boring are stocked for No. 35 through No. 120 chain. Most driver sizes standard with hardened teeth.
|
|
|
|
Double Taper-Lock® Sprockets: Double strand steel sprockets bored to accept Taper-Lock® bushings stocked in No. 35 through No. 80. Most driver sizes standard with hardened teeth.
|
|
|
|
SPLIT HUBS FOR ROLLER CHAIN AND MILL CHAIN SPROCKETS: We stock a variety of semi- finished hubs for building split sprocket assemblies. These hubs are heavy-duty, precision-machined steel. They have been pre-drilled for socket-head cap screws and are ready-to-weld. Splitting is to be carried out after fabrication.
|
|
|
|
SPLIT ASSEMBLIES: Practically any product we manufacture can be provided in a split style on a made-to-order basis. We have substantial expertise in the manufacture of these products. Accuracy of the finished product will vary with the process used varying anywhere from precision, fully machined splits to rough, sawed splits. These processes can be quite time-consuming and expensive but may well save enough installation time to make it worth while.
DETACHABLE HUBS: For ease of assembly and in making critical timing adjustments we can produce sprocket and hub assemblies which can be radially adjusted at installation. Sprockets, hubs or both may be split if desired.
DRAG CHAIN SPROCKETS: Fabricated Drag Chain sprockets with full width teeth are available made- to-order.
|
|