|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
 |
Special Recognition for overall expertise of fluid sealing devices.
|
|
|
|
|
|
HomeOmni MetalcraftOmni Lineshaft Conveyors
|
|
|
|
Omni Lineshaft Conveyors
|
|
Lineshaft Conveyors from Omni Metalcraft are powered by a drive shaft that spans the full length of the conveyor and transmits power to the rollers via a drive spool and belt. When back pressure is applied to the conveyed product, the spools driving the rollers will slip on the shaft allowing the product to accumulate with a minimum amount of back pressure. Applications include transportation, minimum pressure accumulation, zero pressure accumulation, and sortition.
|
|
|
Lineshaft Conveyors from Omni Metalcraft are available with a number of formed frame specifications, including galvanized. Between frame dimensions from 13" - 28" in full inch increments are available with 1.375 diameter galvanized rollers. Floor supports are adjustable from 36" to 48" from floor to top of rollers. The drive shaft is a 1" steel shaft with 2" dia. Delrin drive spools. The drive belts are 3/16" urethane, enclosed in a full length spool drive guard.
|
|
|
|
Bearings in Omni Metalcraft lineshaft conveyor are sealed, pre-lubricated, and self-aligning. Drive units can be mounted to curves, spurs, and straight sections to provide power. 5/8" dia. ceiling hangers are available for overhead mounting. Curves are available in 30°, 45°, 60°, and 90° modules, spurs are available in 30° and 45° models. Curves will have tapered rollers.
|
|
|
|
Omni Metalcraft lineshaft conveyor can be fitted with many optional accessories including: urethane belt transfers to re-direct product 90° onto another conveying line, live gates to allow access to equipment, zero pressure accumulation models, dual shaft configuration, pusher devices to diver product to other conveying lines, crossover rollers, stops, brakes, and traffic cops.
|
|
|
|
|
|
|
|
|
|
|
|
|